Exhibition Walls Ireland: Inhaker Panel Sizes 88×195–300 cm & Buying Guide
An inhaker exhibition wall is a rigid printed panel that hooks between upright posts — modular enough to run as a short brand face or a longer booth wall, and reprintable when the campaign changes. The buying decision in Ireland is which height fits the venue, whether you need 10 mm Re-board or Forex, and whether the graphic should print on the front only or both sides.
This guide covers printed exhibition walls in Ireland from PrintNPack — panel sizes, materials, print options and when to choose an inhaker over a pop-up display stand or a freestanding LED frame. Exhibition walls Ireland quote from €97.44 ex VAT for one 88 × 195 cm Re-board panel printed on the front, with Ireland delivery included from Ashbourne. Configure size and options on the product page for a live price — we only state the published from-price here.
Who buys inhaker exhibition walls in Ireland?
Typical buyers are agencies building Dublin product-launch walls, SMEs on the Cork and Galway exhibition circuit who already own post-and-foot hardware, retailers who need a rigid aisle run without a folding fabric frame, and venues that swap graphics between events. Ashbourne-based supply keeps Irish lead times practical when the hall date is fixed and artwork is still being signed off.
Inhaker panels sit between portable roll-up banners and stretch fabric banner stands. Choose an inhaker when you need a rigid printed face that hooks into posts and can be extended panel by panel. Choose a pop-up when the whole wall must fold into a bag; choose an LED frame when you need an illuminated freestanding lightbox rather than a hook-in board.
Inhaker panel sizes at a glance
Every panel shows an 88 cm visible width. The board is cut at 95.8 cm wide so the edges hook into the posts. Height is the main choice — 195 cm, 247.5 cm or 300 cm.
| Visible size | Best for |
|---|---|
| 88 × 195 cm | Standard booth backwall height for most Irish trade-show shells and retail runs |
| 88 × 247.5 cm | Taller face when the venue allows a higher brand stack above desk height |
| 88 × 300 cm | Full-height panel for halls and launches that need a dominant vertical wall |
88 × 195 cm covers most Irish shell-scheme and retail runs. 88 × 247.5 cm adds height when the venue allows a taller brand stack. Step to 88 × 300 cm for a full-height launch wall. Add panels side by side — order 1 to 10 in one line — to build a longer display wall without switching to a stretch fabric media wall.
Re-board vs Forex, front vs both sides
Every size is offered in 10 mm Re-board or 10 mm Forex. Re-board is a light honeycomb board that is easier to carry to the next show. Forex is a solid foam board — heavier and stiffer when the wall must stay flatter for longer stand periods. Print is front only (full colour on the face, plain back) or both sides when the aisle reads the wall from behind.
| Option | Choices |
|---|---|
| Visible width | 88 cm on every size (cut width 95.8 cm for the hook-in edges) |
| Material | 10 mm Re-board or 10 mm Forex |
| Front only (4/0) or both sides (4/4) | |
| Quantity | 1 to 10 panels in one order line |
| Hardware | Posts and foot plates are not included |
| Minimum order | 1 printed panel |
You supply the artwork. Photographs on the shop page are example prints only — including sample brand graphics — and are not the print you receive. Plan safe margins inside the visible 88 cm face so logo type does not sit on the hooked edges.
Inhaker vs pop-up vs LED frame vs fabric stand
- Inhaker exhibition wall — rigid printed panel, 88 cm visible width, three heights, Re-board or Forex, posts not included, Ireland delivery included
- Pop-up display stands — folding frame with printed fabric, packs for touring, optional LED on backlit cloth
- Freestanding LED frames — unprinted illuminated kit with flat feet or wheels; graphic ordered separately
- Fabric banner stands — stretch fabric on a straight aluminium tension frame (wider spans, no hook-in board)
Many Irish SMEs pair three or five inhaker panels for the backwall with two roll-up banners for side messaging — that mix covers a standard booth without shipping a full fabric media wall. For curved photo walls, see the curved banner stands Ireland guide.
Price, MOQ and how quoting works
Printed inhaker panels start from €97.44 ex VAT for one 88 × 195 cm 10 mm Re-board panel printed on the front only, with one Ireland delivery of €39.95 included in that line total. Taller sizes, Forex, both-sides print and extra panels change the quote — use the live configurator rather than multiplying a unit guess.
Minimum order is one panel; you can order up to ten in one line. Delivery is counted once per order line, not once per panel. Prices are ex VAT — an Irish VAT invoice adds 23% VAT. Posts and foot plates are never in the panel price. Build show-date buffer into artwork approval so courier slots are not cut short ahead of busy Dublin autumn exhibition weeks.
Delivery across Ireland from Ashbourne
PrintNPack is based in Ashbourne, Co. Meath. Quoted Ireland delivery is included once per order line (ex VAT) to Dublin, Cork, Galway, Limerick and every other county. Local buyers can also arrange collection.
UK or Europe shipping is only confirmed case-by-case on request; this guide focuses on Irish delivery, which is the core service for printed inhaker exhibition walls.
How to order exhibition walls in Ireland
- Confirm you have (or can source) upright posts and foot plates — they are not included
- Pick visible height: 88 × 195, 88 × 247.5 or 88 × 300 cm
- Choose 10 mm Re-board or 10 mm Forex, then front only or both sides
- Set quantity from 1 to 10 panels for the wall run you need
- Upload artwork sized to the visible face, approve the quote, and take Ireland delivery or collect from Ashbourne
Ready to order exhibition walls?
88 × 195–300 cm inhaker panels, Re-board or Forex, front or both sides — from €97.44 ex VAT with Ireland delivery included.
Frequently Asked Questions
Where can I order inhaker exhibition walls in Ireland?
PrintNPack supplies printed inhaker panels with Ireland delivery included from Ashbourne to Dublin, Cork, Galway and nationwide. Build the wall on the product page and request a quote.
What exhibition wall sizes are available?
88 × 195 cm, 88 × 247.5 cm and 88 × 300 cm visible sizes. Panels are cut at 95.8 cm wide to hook into posts.
Are posts included?
No. The price is the printed panel only. Upright posts, foot plates and wheels are not included.
How much do inhaker panels cost?
From €97.44 ex VAT for one 88 × 195 cm 10 mm Re-board panel printed on the front only, with €39.95 Ireland delivery included in that line total. Other options are quote-based on the product page.
Do you deliver to Dublin, Cork and Galway?
Yes. Ireland delivery is included once per order line in the quoted price (ex VAT), with collection available from Ashbourne, Co. Meath.
